3 Tricks To Fix GoPro SD Card Errors!

                        

GoPro SD card errors are the common problem and can be easily handled. However, the SD card error flashes with different error message referring different scenarios.

Hereby, we have come up with this article that will let you understand the different SD card errors and their causing source further providing you the effective solutions to deal with the error issues.

So keep reading the blog to understand the error better and know the potential fixes to resolve the problem with least efforts.

Some Of The Common GoPro SD Card Errors-

·         GoPro “NO SD” or “SD ERR” Message

·         GoPro “SD card is full” error

·         GoPro memory card abruptly not working

·         GoPro SD Card Error “SD card is empty”

So, these are some GoPro SD card errors that you may encounter.

GoPro “NO SD” or “SD ERR” Message

“NO SD” or “SD ERR” error message shows up when your GoPro camera fails to recognize or detect SD card. Hereby, this case requires your SD card to be inserted properly into the camera. For this you need to remove the SD card and then insert it back properly into the camera to deal with the GoPro SD card error problem.

GoPro “SD card is full” error

Another error is GoPro “SD card is full”. You get this error due to wrong SD card file system. So, here you can deal with the situation by formatting your memory card to restore it to normal state. But remember formatting can cause data loss on SD card. So, make sure to have backup of your SD card data before proceeding for formatting.

GoPro Camera SD Card Abruptly Not Working

The GoPro memory card abruptly not working error generally occurs when your card is being used frequently on numerous devices or is old. Also, using inferior or cheap memory cards to save high quality videos can trouble you with GoPro SD card error hero 7.  Therefore, it is always advised to use high quality SD cards to avoid getting such errors on your GoPro camera.

GoPro SD Card Error “SD card is empty”

“SD card folder is empty error” is another error that appears due to corrupted or malfunctioned SD card. Mostly the SD cards got corrupt due to virus.  But sometimes interrupted transfer, improper handling, etc can also end up corrupting your memory card. Using corrupted or damaged SD card can makes files unreadable thereby giving you “SD card is empty” error.

What Causes GoPro SD Card Errors?

• Poor connection
• Using inferior SD card
• Corrupted/damaged memory card
• Virus Infected
• Inappropriate ejection of the memory card
• Removing the SD card from the device while file transferring

How Do I Fix GoPro SD Card Errors in Hero 7/5/4?

Solution 1: Check The Connection

Checking the connection between your memory card & GoPro camera can fix GoPro Hero 7 black SD card error. Make sure that your SD card is been inserted properly into the camera. If not, then follow the instructions below to resolve the error issue:

• Take out the SD card and clean the gold-plated parts on memory card with a rubber or toothbrush.

• Now, clean the card slot in the GoPro.
• Turn off the camera and turn on again to avoid temporary issues.
• Next, insert the SD card back into the camera properly and verify for the error problem.

Solution 2: Use Different SD Card

Another reason triggering such error is using inferior quality memory card. So, try using superior quality SD cards instead of inferior ones to avoid facing such error issues. Also, low quality card can slow down the read/write process thereby taking longer time than usual to process the stored data.

Therefore, use high-quality cards to have a quick read/write speed and to avoid GoPro 7 SD card error.

Solution 3: Scan the SD Card Errors

If the memory card that you are using got corrupted or malfunctioned then you might encounter this error. So in order to fix the error, check your SD card errors with chkdsk. Follow the steps below to repair GoPro SD card errors via chkdsk:

• Insert the card reader into the system along with memory card.
• Next, go to Start and select computer.
• Locate the SD card under Devices tab as removable disk.
• Go for the Start menu again, and type cmd on the search box.
• Now, on the appeared result, go for Command Prompt and make a right click and choose the option Run as administrator.

• Now, on the cmd give the command “chkdsk” followed with a drive letter and further type /f:r/f and press Enter.

• Lastly, wait until the chkdsk search for the errors and repairs them. 

Final Words

Well, GoPro SD card error is a common problem that can easily get resolved with few simple fixes. However, the blog covers all the relevant topics that will help you to understand the error in details thereby further solving it with mentioned effective fixes.

I hope, the blog serves you well thereby letting you resolve GoPro SD card error in no time.

 

 

 

How To Fix “Extend Volume Greyed Out” ? [FIXED]

                                          

Getting extend volume greyed out problem on Windows 8/10/11? If your answer to this question is yes, then no need to worry as this blog covers everything that you will need to get out of this problem.

As you already know that Windows comes with inbuilt Disk management Tool that is used to make partitions on the hard drive. But in spite of its explicit features of creating, deleting, and expanding volumes, the users are reporting for extend volume option is greyed out issue on Disk Management tool.

Well if you are one of the users getting the same issue then go through this blog to get past the problem in no time. But before proceeding directly to the potential solutions, let’s just have a quick overlook through the causes occurring this issue.

What Cause Extend Volume To Be Greyed Out?

• Absence of unallocated space on your Hard drive.
• The volume you want to extend is not a NTFS or Raw partition.
• No unallocated space available behind the partition that you want to extend.

So these are few causes that triggers this problem to arise. Now as you aware of the culprits, it won’t be any difficulty for you to fix the problem with below mentioned solutions.

How To Fix Extend Volume Greyed Out on Windows 8/10/11?

Method 1: Remove the Partition From Between

The first thing you can try to fix the problem is to remove the partition from between if any available. You can do this by following below guided steps:

• Firstly hold Win+X keys altogether and go for the Command Prompt.
• Next on the cmd panel give the command “diskpart” to open DiskPart utility.

• Once opened, type the command “list disk” followed by “select disk X”. Doing this will let you choose your disk.

Note: [X refers to the disk number]

• After that, give command “list partition” and hit Enter.
• Now choose the partition in between and give command there “select partition X”.

·   Note: [X here refers to partition number]

• Next remove the partition by giving the command “delete partition override”.
• Finally you can now easily able to expand the volume once the override partition gets deleted.

·   Method 2: Make Unallocated Space

To wipe out the extend volume greyed out problem you need to create some unallocated space. To expand the partition, you must have the unallocated space on your system drive. So in order to create some unallocated space, you have to first delete the partition that is not in use. And also you have delete the empty volume or partition.

Moreover, instead of deleting the partition, you can also go for shrinking the partition to create some new allocated space on your system drive.

However, make sure that the volume you want to expand or the unallocated space are not next to each other, then you would not be able to expand the volume at all.

Method 3: Delete The Volume Greyed Out Disk

Most times the new volume greyed out problem occurs due to insufficient storage space on disk. This situation demands deletion or shrinking of volume greyed out disk to left the free or unallocated space next to the target volume.  To do so, follow the below steps:

• Firstly, hold the Win+X keys simultaneously and select the Disk Management option.
• Next right click on the empty partition next to the targeted volume.
• Now tap on Delete Volume> OK.
• You may also right click on the neighbor partition that carries enough space and tap on Shrink volume option.

• Here you have to mention the amount of disk space to which you want to shrink.
• And lastly, click on Shrink and then OK for confirmation.

After shrinking or deleting volume greyed out disk, you need to expand the Partition size. Follow the below quick steps to do so:

• Go for Disk Management, right click on targeted partition that you want to expand.
• Select “Extend Volume” and manage the size you want to add to the targeted volume.

• Next click OK for confirmation.

Method 4: Try Converting MBR Disk To GPT

If on applying above methods won’t get you out of this problem, then in that case try converting MBR disk to GPT to break the limit.

In most situations, if the made single volume reaches to 2TB volume size, then you would not be able to further increase the partition. This is the situation, when the extend volume option greyed out. So it is necessary to convert MBR disk to GPT to get past the issue.

Method 5: Change The Partition Format

To increase the size of the partition, you need to have the correct drive category which Windows can easily format. Windows can only expand the NTFS or RAW format partition. In case of FAT32 category, you need to first change the format to NTFS or RAW, then only the Windows can expand it.

So the first thing you have to do is to check the drive format that you want to extend. For this, follow the below steps:

• Hold Win+R keys altogether to launch Run dialogue box.
• Then on the Run, type diskmgmt.msc and hit Enter to open Disk Management.
• Once launched, you can view the drives list there.
• Now, right click on the troublesome drive and click on Properties option.
• There you can view the format under File System section.

If found the format FAT32, then you cannot extend the portion. You need to change the format type to NTFS to expand. Here are the steps to do so:

• Launch Disk management as guided above.
• Right click on the troublesome drive, and select the option Format.

• Now change the File system to NTFS format.
• After that check mark the box stating “Perform a quick format”.
• Then click OK for confirmation.

Once done with above process, you can now easily extend volume greyed out with unallocated space.

Final Words

Well dealing with such problems might sometimes be hectic. Therefore the blog contains each crucial points that is necessary to get you out of the extend volume greyed out problem.

I hope the blog turns out to be helpful thereby helping you to extend the greyed out volume in to time.

 

How To Fix Your Computer Restarted Because of A Problem Mac?

                    

Wondering why your computer restarted because of a problem mac? Well if your answer is yes, then keep reading this blog.

The error is popularly known as “Kernel Panic” that occurs usually when your mac’s OS finds trouble operating your system and thereby ends up flashing this error. This might be the case of damaged hardware & software. The problem results in frequent restart of your mac system which is very annoying. Hereby the situation demands for an immediate troubleshooting or rescue measures.

Therefore we have come up with this blog that contains all the relevant points related to the problems including the causes along with its effective solutions to fix your computer restarted because of a problem please press a key or wait. But before diving directly for solutions, you must have a quick overlook over the causes behind this problem. As it will further help you to make effective choice of the solution that appropriates the problem demand.

Why Your Computer Was Restarted Because Of A Problem MacOS Catalina?

Below are the possible reasons that cause this error to occur on your Mac.

Outdated MacOS- Operating an outdated version of MacOS can lead you to this error. As with time the OS starts developing certain issues or problems that further ends up occurring such errors.

External devices- Sometimes external devices connected to you Mac might cause kernel panic problem.

Software & hardware related issues- Thirdly, if the software or hardware that you are using is damaged or corrupted then you might get this error on Mac.

Overloaded Disk- In most times, overloaded disk might become the reason for such errors. Insufficient disk space won’t let your Mac to function properly.

Deep Mac errors- If there exists a deep errors on your MacOS or hardware then it might troubles you with this error.

Unnecessary startup programs- Another possible reason could be the unnecessary startup programs. As so many startup programs may results in crashing the mac PC thereby causing sudden restart mac because of a problem.

So these are some major reasons behind this error problem. Now as you are aware of the cause, you will be easily able to make effective choice of solution among various mentioned:

Check For Faulty Software And Update

The first thing you have to do is to check for the corrupted or damaged software that are causing this problem to occur and then update them. You can do so with below steps:

• Check for software updates and if available, install it on your Mac.
• Next, reboot your Mac system.
• In case you won’t find any software update, simply uninstall the software.
• Lastly, reinstall the software again.

Unplug External Devices

External devices attached to your Mac PC can also be the major reason occurring this error problem. So you need to detach all the external devices one by one to get rid of the problem. For this you have to first turn off your Mac and then unplug all the external peripherals connected. Once all the devices are detaches, restart you Mac again and check for the error issue if solved or not.

Clear Your Overloaded Disk

As it has already mentioned above that overloaded disk might sometimes be the reason for this error issue. Therefore here it is suggested to clear you disk space to get rid of the issue. You can do this by performing below steps:

• Visit Apple Menu and tap on the option “About This Mac”.
• Next tap on Storage to check the available space.
• If found full or low, then clear some unnecessary apps and files to create space.

• Also, you can use the option CleanMyMac to clear some space on Mac PC.

Update The MacOS

Outdated MacOS also considered to be one of that major reasons occurring this problem on your Mac computer. So here you need to troubleshoot the problem by updating your MacOS.

Here is how you can do so:

• Select Apple icon, and then go to System Preferences tab.
• Next, on System Preferences tab click on Software Update.
• Once clicked, you’ll be able to view the updates if any available here and then tap on Update Now if found.

• And in case you don’t find any update, then go for Advanced option.
• And make sure to check all the option boxes and lastly hit OK.

I hope, the blog serves you well with all potential solutions that will be helpful in fixing your computer restarted because of a problem mac error.

 

How To Fix Mac Flashing Question Mark Folder Error?

                                             

Is your mac flashing question mark folder error? If yes then stop worrying as with this blog you will be easily able to get rid of the problem using various effective methods in no time.

Well talking about this error, the error usually occurs when you booted your Mac, updated your Mac recently or changed your SSD or HD. So on starting your Mac, if you find a question mark instead of Mac folder, then it is due to your system won’t recognize any startup disk.

Moreover, if your startup disk fails to detect the Mac’s OS then you may face this problem. However, the error prohibits the mac folder from loading. Hereby dealing such situation is quite irritating as it frequently flashes the question mark folder on Mac. Therefore, the situation needs to be resolved first hand.

But before diving directly to the solutions, let’s first get a quick overview of the causes behind the error to treat the issue from its root point.

What Causes Mac Folder Blinking Question Mark?

There can be numerous reasons behind this problem. However some of them are highlighted and stated below:

• Corrupted Hard Drive.
• Duplicate Mac OS detected by the Startup task.
• Recently changed your SSD or HD.
• Power Surges.
• Outdated System OS.
• Due to damaged software system.

So above are few culprits that trigger this problem on Mac. Now fix the issue in no time with below mentioned effective fixes.

How to Fix Mac Flashing Question Mark Folder?

Below are the list of solutions to fix Mac flashing question mark folder:

Solution 1: Try Repairing the Startup Disk

The first thing you have to do is to repair the startup disk by using macOS utilities. Below are the guided steps to do so:

• At first, long hold the Power button.
• After that long hold +R key on your keyboard at the time Mac is rebooting to enter into recovery mode.
• Now, select Disk Utility option.

• Then on the next appeared window, click on the Startup disk and start First aid to let the software find the issue or fix the mac folder blinking question mark issue.

Solution 2: Try Resetting NVRam

The next solution you can try to fix the issue is by resetting your NVRam. Follow the steps below:

• Firstly turn off Mac by long pressing the Power button.
• Next reboot your system again.
• Long hold the Command+ Option +P+R keys altogether while Mac boots until your PC restarts.
• Free the keys, once released it will reset your NVRam.

Solution 3: Try Reformatting your Startup Disk

Another effective solution you can try is to reformat your startup disk to get out the question mark folder issue on Mac. Follow the mentioned below steps accordingly:

• At first start your Mac in Recovery Mode.
• Then click on Disk utility.

• Next tap Mac HD and click Erase.
• Now on the appeared next window, you’ll be provided with the option to reset the disk’s name & format.

• Lastly, select Erase. Once selected, it will remove all the data from your hard disk.

Solution 4: Try Reinstalling the Mac OS

Most of the time, reinstalling can get you out of the problem. Hereby it is advised to reinstall your Mac OS to get done with the issue. For this you just need to follow the quick steps below.

• Go for Mac utilities window.
• Next click on Option 2 (Reinstall macOS).
• Now tap on Continue.
• After that, choose Macintosh HD.
• Save a backup of your entire data and erase Macintosh HD.
• Now perform reinstallation by following the onscreen guide.
• Lastly wait until the installation process gets completed.
• Once done, Mac will restarts automatically and boots to a Startup Disk.

So above are some effective methods that will get you out of mac flashing question mark folder issue. I hope the blog comes out to be helpful thereby letting you access the Mac folder without any further hurdle.

 

How to Transfer Photos from Camera to Computer?

Taking snaps daily is now become essential part of our life. Therefore nowadays almost every camera comes with external memory card that can store large number of your snaps. However keeping photos in SD card involves a risk as it can get corrupted anytime.

Now this arises a question of how to keep backup of your camera photos? Well, it is best to transfer photos from camera to computer on regular basis to maintain a backup.

Moreover if you are wondering how to transfer photos from camera to computer, then with the help of this blog you can easily transfer your snaps from camera to PC on daily basis. So let’s move on to the ways.

How Do I Transfer Photos From Camera To Computer Instantly?

Transferring photos from camera to computer nowadays become so easy requiring least efforts. However, the easiest way to transfer your camera photos to laptop is with card reader. You just have to simply follow the quick below steps:

• Insert the SD card in card reader.
• Plug in the card reader to your PC.

• Once plugged, you’ll be able to view the folder that contains your snaps.
• Next copy the photos you want to transfer and paste them in the desired folder on your PC.

There are other ways also in which you can transfer your camera snaps to computer easily. Some of them are specified below.

Connect Your camera With Computer

Another way you can use for transferring your essential snaps from camera to PC is by connecting your camera to system via USB cable. Below are the step by step instruction that you can follow to do so:

• Connect camera to your System using USB.

• Turn off the camera.
• Go to Start on your system and then My Computer.
• Now on removable disk you will see the camera name.
• Expand the icon to view the content.
• Navigate for DCIM folder and open it.
• Next, copy all the snaps in the folder and paste into the desired folder on your PC.

Once completed with copying, disconnect the camera from computer and check whether all snaps has been transferred or not.

Using Photo App to Transfer Snaps

Thirdly you can also make use of other photo apps like Picasa to transfer photos from camera to laptop without losing quality. For this follow the quick steps below:

• Download the Picasa app and connect SD card to your system.
• Open the Picasa app and tap on the Import option.

• Next, the box appear displaying two options stating Import to & Import from.
• After that copy all the photos in the Import from option.

• Create a new folder in the desired location and select the new folder in the Import to tab.
• Click on OK to start the transfer of photos.

Transfer Photos from Camera to Computer Wirelessly

Fourthly you can also transfer photos from camera to PC wirelessly. For this you need to turn on Bluetooth in both camera and laptop. Below are the steps guide:

• Turn on Bluetooth in both camera and laptop.
• Pair with the device.
• Select the snaps to transfer.
• And finally transfer the snaps to laptop.

Final Thoughts

So below are some mentioned ways in which you can easily transfer your photo from camera to computer. Now without any worry of losing photos or space, you can click as many photos you want.

With this blog you can transfer your camera snaps to your system any time. I hope the answer to how to transfer photos from camera to computer is got well answered in this blog.